Window trays are designed to effectively prevent water leakage into the building structure. Window tray ends are delivered as a pair, consisting of a left and right piece.
Primarily utilized in stud work style constructions such as dormers. Where various cladding materials like slates, plastic, and shiplap boards are employed. These trays serve the purpose of weatherproofing the installed windows.
They are designed to turn up at the window posts and inside the window. Finally turning down to protect the cladding and any fixings. The window trays must have an overlap of at least 100mm with the flat central section to ensure the window remains watertight.
Leadworx fabricates a range lead flashing products for made using 100% recyclable Code 4 sheet lead milled to British Standard BS EN 12588.
LEADWORX TOOLS
Calculate from measurements, or estimate the angle from a photograph.
Measure the vertical rise and horizontal run between the same two points.
Use the same unit for both, such as mm or cm. Run is not the sloping roof length or automatically the full building width.
Enter your measurements to begin.
Enter measurements first.
These formats describe the same slope; they are not product size recommendations.
Use a square-on view of the roof profile, with a known horizontal reference in the same plane.
The photo box opens your camera on supported phones and tablets. On a computer, choose a photo file or drop one into the box.
Processed on your device by this tool. JPG, PNG or WebP, up to 20 MB and 24 megapixels. Export HEIC as JPG first.
Tap the photo box or choose a saved photo.
Tap four points: two on the roof slope, then two on a level reference. Drag points to adjust. Use long lines for a better estimate.
Focus the photo. Arrow keys move the marker; Shift moves 10 pixels. Enter adds a point. Select a placed point below to adjust it with the arrows. Escape returns to the free marker.
No points placed.
Mark the photo first.
The reference line corrects camera tilt, not perspective or lens distortion. A photo cannot guarantee the angle needed for manufacture.
Switch to Ireland