Ireland
Ireland Currently viewing - Ireland

Flat Roof Slates

Flat roof slates are designed to be an attractive and durable flashing. To weather a pipe through a flat roof to ensure watertight integrity. They can be used for flues and soil stacks, on tiled, asphaltic, felt and slate roofs.

The diameters listed are the internal dimensions of the up stand pipe.

They are made in Cornwall, Great Britain from 100% recycled Code 4 sheet lead. Milled to British Standard BS EN 12588

If you cannot find the size you require please contact us as we can quickly fabricate bespoke sizes.

Chris Pearce
Chris Pearce is the head product developer and fabricator at Leadworx with over 10 years of experience in lead roofing products. His background in solid fuel installations and the environmental sector led him to founding the company to research and develop premium lead flashings. This has led to the creation of a range of products that are hand fabricated in the UK and trusted by builders and homeowners in the UK, Ireland and Europe.
Picture of Chris Pearce

Chris Pearce

Chris Pearce is the head product developer and fabricator at Leadworx with over 10 years of experience in lead roofing products. His background in solid fuel installations and the environmental sector led him to founding the company to research and develop premium lead flashings. This has led to the creation of a range of products that are hand fabricated in the UK and trusted by builders and homeowners in the UK, Ireland and Europe.

LEADWORX TOOLS

Roof pitch calculator

Calculate from measurements, or estimate the angle from a photograph.

Rise & run

Measure the vertical rise and horizontal run between the same two points.

Horizontal run Rise Roof slope Pitch

Use the same unit for both, such as mm or cm. Run is not the sloping roof length or automatically the full building width.

Enter your measurements to begin.

Calculated roof pitch—degrees from horizontal
Other pitch formats

Enter measurements first.

These formats describe the same slope; they are not product size recommendations.

Check the pitch before ordering made-to-measure leadwork. Measure only from a safe, accessible position.